Electrocatalysis under the atomic force microscope

To manage the energy transition, it will also be important to rapidly develop cheap and efficient materials that can be used to split water or CO₂by electrocatalysis. In this process, part of the electrical energy is stored in the chemical reaction products. The efficiency of such electrocatalysts depends largely on the nature of the electrode-electrolyte interfaces, i.e. the interfaces between the solid electrodes and the typically aqueous electrolyte. However, spatially resolved physical studies of such solid-liquid interfaces are still relatively scarce.

More insights with AFM

Dr Christopher S. Kley and his team have now developed a new approach to correlative atomic force microscopy (AFM). An extremely sharp tip is scanned across the surface and its height profile is recorded. By attaching the tip to the end of a miniaturised cantilever, the force interactions between the tip and the sample surface, including frictional forces, can be measured with high sensitivity. In addition, the electrical current flowing through the mechanical contact can be measured, provided a voltage is applied. "This allowed us to simultaneously determine the electrical conductivity, the mechanical-chemical friction and the morphological propertiesin situ(i.e. under the relevant liquid-phase conditions rather than in vacuum or in air)," emphasises Kley.

Copper-gold electrocatalyst

Using this method, the scientists now studied a nanostructured and bimetallic copper-gold electrocatalyst, in collaboration with Prof. Beatriz Roldán Cuenya from the Fritz-Haber-Institute (FHI). Among others, such materials are used in the electrocatalytic conversion of CO₂into energy carriers. "We were able to clearly identify islands of copper oxide with higher electrical resistance, but also grain boundaries and low-conductivity regions in the hydration layer where the catalyst surface comes into contact with the aqueous electrolyte," says Dr Martin Munz, first author of the study.

Such results on catalyst-electrolyte interfaces help to optimise them in a targeted manner. "We can now observe how local electrochemical environments influence charge transfer at the interface," says Kley.

Focus on solid-liquid interfaces

"However, our results are also of general interest to energy research, especially for the study of electrochemical conversion processes, which also play a role in battery systems." Insights into solid-liquid interfaces can also be useful in completely different areas of research, such as understanding corrosion processes, nanosensor systems, and possibly addressing scientific queries in fluidics and environmental sciences, such as dissolution or deposition processes on metal surfaces exposed to water.

This work was carried out within the framework of the CatLab project, where researchers from the HZB and the FHI of the MPG are working together, to develop thin-film catalysts for the energy transition.