advertisement
Science News
from research organizations

Fusion model hot off the wall

Predicting molecular rotational temperature for enhanced plasma recombination

Date:
July 27, 2023
Source:
Kyoto University
Summary:
Heat load mitigation is critical to extending the lifetime of future fusion device. Researchers have found a way to explain the rotational temperatures measured in three different experimental fusion devices in Japan and the United States. Their model evaluates the surface interactions and electron-proton collisions of hydrogen molecules.
Share:
advertisement

FULL STORY

Humans may never be able to tame the Sun, but hydrogen plasma -- making up most of the Sun's interior -- can be confined in a magnetic field as part of fusion power generation: with a caveat.

The extremely high temperature plasmas, typically as high as 100 million degrees Celsius, confined in thetokamaks-- donut-shaped fusion reactors -- cause damage to the containment walls of these mega devices. Researchers inject hydrogen and inert gases near the device wall to cool the plasma by radiation andrecombination, which is the reverse of ionization. Heat load mitigation is critical to extending the lifetime of future fusion device.

Understanding and predicting the process of the vibrational and rotational temperatures of hydrogen molecules near the walls could enhance the recombination, but effective strategies have remained elusive.

An international team of researchers led by Kyoto University has recently found a way to explain the rotational temperatures measured in three different experimental fusion devices in Japan and the United States. Their model evaluates the surface interactions and electron-proton collisions of hydrogen molecules.

"In our model, we targeted the evaluation on the rotational temperatures in the low energy levels, enabling us to explain the measurements from several experimental devices," adds corresponding author Nao Yoneda of KyotoU's Graduate School of Engineering.

通过使预测和控制f the rotational temperature near the wall surface, the team was able to dissipate plasma heat flux and optimize the devices' operative conditions.

"We still need to understand the mechanisms of rotational-vibrational hydrogen excitations," Yoneda reflects, "but we were pleased that the versatility of our model also allowed us to reproduce the measured rotational temperatures reported in literature."

advertisement

Story Source:

Materialsprovided byKyoto University.Note: Content may be edited for style and length.


Journal Reference:

  1. N. Yoneda, T. Shikama, F. Scotti, K. Hanada, H. Iguchi, H. Idei, T. Onchi, A. Ejiri, T. Ido, K. Kono, Y. Peng, Y. Osawa, G. Yatomi, A. Kidani, M. Kudo, R. Hiraka, K. Takeda, R.E. Bell, A. Maan, D.P. Boyle, R. Majeski, V.A. Soukhanovskii, M. Groth, A.G. McLean, R.S. Wilcox, C. Lasnier, K. Nakamura, Y. Nagashima, R. Ikezoe, M. Hasegawa, K. Kuroda, A. Higashijima, T. Nagata, S. Shimabukuro, I. Niiya, I. Sekiya, M. Hasuo.Spectroscopic measurement of increases in hydrogen molecular rotational temperature with plasma-facing surface temperature and due to collisional-radiative processes in tokamaks.Nuclear Fusion, 2023; 63 (9): 096004 DOI:10.1088/1741-4326/acd4d1

Cite This Page:

Kyoto University. "Fusion model hot off the wall: Predicting molecular rotational temperature for enhanced plasma recombination." ScienceDaily. ScienceDaily, 27 July 2023. /releases/2023/07/230727144216.htm>.
Kyoto University. (2023, July 27). Fusion model hot off the wall: Predicting molecular rotational temperature for enhanced plasma recombination.ScienceDaily. Retrieved September 6, 2023 from www.koonmotors.com/releases/2023/07/230727144216.htm
Kyoto University. "Fusion model hot off the wall: Predicting molecular rotational temperature for enhanced plasma recombination." ScienceDaily. www.koonmotors.com/releases/2023/07/230727144216.htm (accessed September 6, 2023).

Explore More
from ScienceDaily

RELATED STORIES