advertisement
Science News
from research organizations

Insects' drag-based flight mechanism could improve tiny flying robots

Date:
December 10, 2019
Source:
American Institute of Physics
Summary:
Thrips don't rely on lift in order to fly. Instead, the tiny insects rely on a drag-based flight mechanism, staying afloat in airflow velocities with a large ratio of force to wing size. Researchers have performed the first test of drag force on a thrip's wing under constant airflow in a bench-top wind tunnel and, drawing from microfabrication and nanomechanics, they created an experiment in which a thrip's wing was glued to a self-sensing microcantilever.
Share:
advertisement

FULL STORY

Thrips are tiny insects 2 millimeters long, about as long as four human hairs are thick. Thrips are known for their unwelcome ability to devour garden plants and, lately, to inform the design of microrobotics.

Unlike larger insects, birds, and airplanes, thrips don't rely on lift in order to fly. Instead, the tiny insects rely on a drag-based flight mechanism, keeping themselves afloat in airflow velocities with a large ratio of force to wing size. Wind is proportionally stronger when you are a tiny insect with wings that measure on the microscale.

The leading-edge vortex is remarkably defused at such a tiny size, so little lift force can be generated. Author Yonggang Jiang explained the cause of this is the ultralow Reynolds number, which is a ratio between inertial and viscous forces in a fluid, such as the air.

而基于模型的研究已经证实a drag-based mechanism for tiny insects, models aren't biologically faithful. A thrip's wing can have between 45 and 120 hairlike bristles extending from the wing membrane.

Despite the increasing precision of microelectromechanical systems, prior studies risked inaccurate calculations of drag force, because they did not include the length, angle or number of bristles.

In a study published this week in theJournal of Applied Physics, from AIP Publishing, researchers performed the first test of the drag force on an actual thrip's wing under constant airflow in a bench-top wind tunnel. Drawing from experience in microfabrication and nanomechanics, Jiang created an experiment in which a thrip's wing was glued to a self-sensing microcantilever that uses piezoresistors to take voltage measurements that are used to calculate the drag force on the wing.

The study served to quantify the aerodynamic characteristics of the wings, closely examining how much air leaks through the bristled wing and how airflow leakiness affects the drag force per unit area. The natural bristled design could be useful in designing tiny flying or swimming robots, Jiang said, as well as flow sensors and gas sensors, in which a bristled structure could increase sensitivity.

The authors plan to further explore using a microcantilever to study the thrip's flight mechanism and the kinematics of the wing, including the angle of attack, the various angles at which a thrip can position its wing, and how that affects the drag force in flight.

advertisement

Story Source:

Materialsprovided byAmerican Institute of Physics.Note: Content may be edited for style and length.


Journal Reference:

  1. Peng Zhao, Zihao Dong, Yonggang Jiang, Hao Liu, Hongying Hu, Yinfang Zhu, Deyuan Zhang.Evaluation of drag force of a thrip wing by using a microcantilever.Journal of Applied Physics, 2019; 126 (22): 224701 DOI:10.1063/1.5126617

Cite This Page:

American Institute of Physics. "Insects' drag-based flight mechanism could improve tiny flying robots." ScienceDaily. ScienceDaily, 10 December 2019. .
American Institute of Physics. (2019, December 10). Insects' drag-based flight mechanism could improve tiny flying robots.ScienceDaily. Retrieved August 7, 2023 from www.koonmotors.com/releases/2019/12/191210111705.htm
American Institute of Physics. "Insects' drag-based flight mechanism could improve tiny flying robots." ScienceDaily. www.koonmotors.com/releases/2019/12/191210111705.htm (accessed August 7, 2023).

Explore More
from ScienceDaily

RELATED STORIES